Recommended O.S.Brushless motors: OMA5020-490 / OMA5025-375

Input voltage range: 14.8V-52.2V (4S LiPo-12S LiHV)

Maximum peak current 150A
Maximum current 100A
No BEC (Isolation of input signal by photocoupler)
Progressive angle setting: Fixed 0 to 25° Selectable in 1° increment
PWM frequency: 8kHz 16kHz 32kHz Selectable

Active Freewheel: ON/OFF

Brake amount setting: 0 to 100% in 2% increments
Brake time: 0 to 2.0 seconds in 0.1-second increments
Current limit: OFF/40% to 120% in 5% increments
Governor: ON/OFF (except for F3A competition)
Throttle setting: Automatic/Numerical setting Stop position/Maximum position
Dimensions: 37mm(W)x95mm(L)x16mm(H)
Weight: 124g (including lead wire 4φ connector)
Power lead wire: 13AWG length 100mm, silicon-coated
Motor lead: 14AWG length 100mm, silicon-coated
Input signal lead: 22AWG3-Wire (black-red-white) 240±10mm
Setting lead: 22AWG3-Wire (brown-red-orange) 140±10mm
Setting method: Parameter can be set by OCP-3
Protection function: Start protection / Low voltage cutoff / No signal cutoff / 
Overheat protection Anti-spark / Automatic battery cell number recognition